STI Electronics Engineering
Manufacturing Services
- Contract Assembly: Customized assembly solutions tailored to meet specific requirements.
- Prototype Development: Accelerate development with our rapid prototyping services.
- New Product Introduction (NPI) Builds: Specialize in efficiently transitioning new products to high-volume production.
- Design for Manufacturing (DFM): Optimize designs for improved manufacturing quality and cost-efficiency.
Electronics manufacturing services designed to take your products from initial design through full-scale production, ensuring quality, efficiency, and scalability.
STI Electronics (SMT & PCB / IPC)
Training & Certifications
- Hands-on Skills Development: Foster a strong workforce with practical, hands-on training in electronics assembly.
- Creative Training Solutions: Customized training courses tailored from commercial to high-reliability standards.
- IPC Authorized Training Center: Instructor and Operator level training for IPC courses including the J-STD-001 and IPC/WHMA-A-620 Space.
- Flexible Training Locations: Courses available at STI’s facilities in Alabama and Texas, or onsite at your location.
STI Electronics, Inc. is a leading provider of comprehensive solder and electronic assembly training, designed to enhance skills and meet the stringent requirements of the industry.
Training Classes + Services
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Initial Training/Lecture & Hands-On
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Initial Training/Lecture & Hands-On
$1,320.00
This course provides training for operators who will build or inspect hardware to NASA-STD-8739.1, Polymeric Applications. Topics include staking, conformal coating, potting, and bonding. Practical exercises include demonstrating inspection techniques for these polymeric material applications and demonstration of students’ competency for using these techniques in a manner that produces hardware that meets the requirements of the standard. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739.1. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA).
ATTN: Initial training courses require an eye exam to be submitted prior to attending class.
Description
This course provides training for operators who will build or inspect hardware to NASA-STD-8739.1, Polymeric Applications. Topics include staking, conformal coating, potting, and bonding. Practical exercises include demonstrating inspection techniques for these polymeric material applications and demonstration of students’ competency for using these techniques in a manner that produces hardware that meets the requirements of the standard. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739.1. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA). ATTN: Initial training courses require an eye exam to be submitted prior to attending class.Related products
-
IPC J-STD-001H Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
$1,930.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00 Select options -
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00 Select options -
IPC-A-600 Certified IPC Specialist (CIS) Training Certification/Recertification Program/Lecture Based
$960.00 Select options
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00
Description
This program is for anyone needing to renew their existing IPC-7711/7721 CIS Certification. This is a hands-on course. The CIS class is modularized to allow you to choose only the modules needed. Module one is mandatory and consists of Common procedures. Modules 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only), Laminate Repair, and Circuit Repair. An open book exam is required after Module 1. Recertification is required every 2 years.
Related products
-
IPC J-STD-001H Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,070.00 Select options -
IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Certification Program/Lecture &Hands-On
$1,900.00 Select options -
IPC/WHMA-A-620 Space CIT Certification/Lecture & Hands-On
$2,780.00 Select options
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00
This retraining course provides instruction to those who are responsible for building or inspecting electrical cables and harnesses per NASA-STD-8739.4, Crimping, Interconnecting Cables, Harnesses, and Wiring. Topics include wire and cable preparation, connector contact preparation and installation into connectors, crimp ring and backshell installation, installation of splices, installation of grounding wires, harness manufacturing techniques, quality control practices, and quality assurance measurements. All of the requirements contained in the standard are discussed. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739,4. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” it states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA).
ATTN: Retraining courses require an eye exam to be submitted prior to attending class.
To participate in an Operator/Inspector retraining class the student must have previously completed the Initial training and have a current certification.
Description
This retraining course provides instruction to those who are responsible for building or inspecting electrical cables and harnesses per NASA-STD-8739.4, Crimping, Interconnecting Cables, Harnesses, and Wiring. Topics include wire and cable preparation, connector contact preparation and installation into connectors, crimp ring and backshell installation, installation of splices, installation of grounding wires, harness manufacturing techniques, quality control practices, and quality assurance measurements. All of the requirements contained in the standard are discussed. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739,4. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” it states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA).
ATTN: Retraining courses require an eye exam to be submitted prior to attending class. To participate in an Operator/Inspector retraining class the student must have previously completed the Initial training and have a current certification.
Related products
-
IPC/WHMA-A-620 Instructor (CIT) Hands-On Lab
$350.00 Select options -
IPC/WHMA-A-620 Space CIT Certification/Lecture & Hands-On
$2,780.00 Select options -
IPC-A-600 Certified IPC Specialist (CIS) Training Certification/Recertification Program/Lecture Based
$960.00 Select options -
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00 Select options
WE ARE AN
AUTHORIZED TRAINING CENTER
More Services...
Engineering and Design Services
Advanced circuit design, microelectronics, and environmental testing to meet precise customer specifications.
Testing & Quality Assurance
Rigorous testing protocols and quality assurance measures employed to maintain the highest standards of product reliability and performance.
Rework and Repair Services
Enhance or restore electronic assemblies, emphasizing precision and compliance with industry standards.
Materials, Supplies & Training Kits
Our comprehensive range of high-quality kits and components, ideal for both training and practical electronics projects.
STI Current News:
Subcribe to STI
Thanks for subscribing! Please check your email for further instructions.